MT1 Vac Robotic Sweeper-Vacuum

The MT1 Vac is an autonomous sweeper and vacuum for large commercial and industrial floors. It cleans scheduled routes on hard floors and carpet, adjusts to the surface, avoids obstacles, and returns to its charging dock automatically.

The MT1 Vac is built specifically for commercial and industrial floors, making it ideal for warehouses, distribution centers, retail spaces, healthcare facilities, education spaces, and hospitality environments. It recognizes the floor type and adjusts suction and brush speed, making it useful where routes cross between smooth flooring and low-pile carpet.

It utilizes an advanced autonomous sweeping mechanism paired with a high-suction industrial vacuum to sweep and vacuum in a single pass. It combines sweeping brushes with a 21.7-inch (55 cm) vacuum path. Dust and larger waste are separated into a 0.21 cubic-foot (6 L) trash bin and two 0.247 cubic-foot (7 L) dust bags.

The MT1 Vac Sweeper-Vacuum delivers up to 4 hours of runtime per charge, covering an impressive 15,000 sq ft per hour, which equates to roughly 60,000 sq ft per charge.

While autonomous floor cleaning equipment requires an upfront technology investment, the MT1 Vac reduces the time employees spend driving or pushing sweepers on repeatable routes. FCE makes it highly accessible with rental options.

By covering 15,000 sq ft per hour and completing both sweeping and vacuuming in one pass, the MT1 Vac drastically cuts manual labor on large floors, allowing you to reallocate your staff to higher-value tasks. Exact ROI depends on floor area, cleaning frequency, wage rates, current machine time, and how much work can be moved to autonomous routes.

The MT1 Vac receives Over-the-Air (OTA) updates to keep its software and mobile app controls current. Your FCE robotics specialist can detail any specific long-term cloud subscription terms during your consultation.

The MT1 Vac can run scheduled routes while employees handle edges, congested areas, detail cleaning, and other facility tasks. Equipped with high-capacity batteries, rapid charging, and auto-docking, the robotic sweeper provides 24/7 continuous operation to meet high-frequency demands without downtime.

MT1 Vac uses a sophisticated autonomous mapping system. During your delivery and setup, an FCE robotics specialist will map your workflow and space including approved cleaning areas and restricted zones.

Yes the MT1 Vac actively maps and successfully navigates complex corridors, aisles, and open floors. The system can be configured with cleaning routes and zones for different areas.

The machine is exceptionally easy to schedule and manage via its integrated mobile app. Approved routes can be scheduled for off-hours or other recurring windows. For extended 24-hour operation, the machine cycles between cleaning and automatic charging at the docking station.

The MT1 Vac features dynamic pedestrian and vehicle avoidance. It detects temporary obstacles such as people, carts, pallets, and moved furniture, then slows, stops, or adjusts its route as needed. Significant or permanent changes to the approved cleaning area may require the map or route to be updated.

Yes, the integrated mobile app can show operating status, cleaning progress, and task history.

A connection is needed for mobile app access and OTA updates, but the onboard system handles active, real-time autonomous mapping and navigation.

Routine work includes checking and emptying the hopper, monitoring the two dust bags, inspecting brushes, wiping sensors, and checking the H11 filter (an H13 filter is optional). The docking station handles charging only.

Wearable replacement intervals depend on your facility's specific floor conditions. However, FCE offers an optional maintenance plan (+15% to your rental) that fully covers quarterly preventative maintenance (PM) and all wearables.

FCE sells, deploys, and services the MT1 Vac nationwide. Optional maintenance coverage adds 15% to the rental rate and includes quarterly preventive maintenance and wear items.

The MT1 Vac utilizes its mobile app to communicate with operators.

Software and navigation improvements are delivered through over-the-air updates. Internet access is required when updates are downloaded.

Absolutely. MT1 Vac is designed to detect people, vehicles, and other obstacles including sudden “pop-out” movements, then slow, stop, or reroute as conditions require.

The MT1 Vac autonomous floor sweeper safely navigates and detects obstacles using its 3D LiDAR sensors and dynamic pedestrian and vehicle avoidance technology that identifies people, vehicles, pallets, furniture, and low-profile hazards.

The MT1 Vac is engineered with a high-suction industrial vacuum that works in tandem with the sweeper to effectively capture dust and prevent particles from being kicked up. Standard filtration is H11, with an optional H13 filter for facilities that need a higher filtration level.

The machine detects the person or vehicle, slows or stops, yields when necessary, and resumes the approved route when the path is clear. Facility traffic rules and restricted zones still apply.

The robot measures about 33 × 23.6 × 19.3 inches (84 × 60 × 49 cm). It needs at least 29.5 inches (75 cm) of path clearance plus a clear approach to the charging dock. The docking station is completely plug-and-play; it requires a standard 110V outlet with no 220V wiring, electrician, or plumber required.

The standard charging dock does not empty the debris container. Hopper emptying is manual unless the compatible optional dumping solution is included in the final configuration.

It uses a standard outlet and does not require a 220V or hardwired connection.

Deployment is incredibly fast. The MT1 Vac robots are plug-and-play, and your designated FCE robotics specialist maps the workflow upon delivery so the unit can begin operating quickly. The exact deployment timing depends on the facility's size, number of routes, traffic conditions, network readiness, dock location, and training needs.

Yes, FCE provides on-site setup, mapping and staff training during delivery. There is a one-time delivery and setup fee which can be discussed with your designated robotics specialist.

The MT1 Vac robotic sweeper is highly user-friendly and can be controlled easily via the mobile app. After initial setup and training, an employee can select an approved job and start it through the machine's available controls or app. The team does not need to program a new route each time it runs a scheduled task.

Provide an accessible standard outlet, select a dock area, clear unusual temporary obstructions, identify restricted zones, and make sure the intended routes reflect normal operations. No water or drain connection is needed for this dry-cleaning model.

Yes, FCE offers purchase options and flexible rental tiers.

The initial $995 setup fee includes delivery and the docking station. You can also add an optional 15% maintenance package, which fully covers quarterly preventative maintenance (PM) and all wearables.

Yes, FCE offers free on-site demos. A robotics specialist will walk your floor, map your workflow, and show the MT1 Vac Sweeper-Vacuum working in a space like yours.

FCE sells, deploys, and services these robots nationwide, ensuring prompt delivery and fast integration once your rental term is finalized.

By offering highly flexible 1-month, 12-month, and 24-month rental terms, FCE provides your facility the agility to upgrade your equipment or expand your fleet seamlessly when your agreement concludes.