CC1 Pro Robotic Scrubber-Sweeper

The CC1 Pro is a versatile commercial cleaning robot that can sweep, vacuum, dust mop, and scrub on routes established during initial setup. It detects obstacles and floor conditions as it works, then returns to its workstation for charging and fluid service.

The CC1 Pro can clean common commercial hard floors and carpet. Its four cleaning modes make it a good fit for offices, gyms, retail, schools, healthcare facilities, and clean, open industrial spaces with repeatable routes and at least 27.6 in (70 cm) of clearance.

The CC1 Pro dispenses clean water from its 3.96 gal (15 L) solution tank, scrubs the floor with a 15.7 in (400 cm) scrub deck, and simultaneously vacuums the dirty water into its 3.96 gal (15 L) recovery tank, leaving floors instantly dry. The workstation can refill clean water and drain recovered water automatically.

While it is engineered primarily as a dedicated scrubber to wash and dry floors, its advanced brush mechanics can capture light, loose debris typical of daily commercial foot traffic prior to the scrubbing action. The CC1 Pro can also detect floor type and vacuum standard high-pile commercial carpet.

The CC1 Pro is specifically designed for small and mid-size commercial facilities with tight corridors and aisles. It provides exceptional productivity, cleaning up to 10,500 sq ft per hour and covering roughly 50,000 sq ft per charge.

CC1 Pro is designed to be operated autonomously via mobile. However, staff can pause, position, or move the machine using its available controls for spot-cleaning or transport.

The CC1 Pro can run for up to 5 hours while scrubbing or sweeping and vacuuming, covering up to 10,500 sq ft per hour. The exact runtime depends on the cleaning mode.

While the initial investment in autonomous floor cleaning technology is higher, it offsets costs drastically through labor savings. It significantly reduces the time employees spend driving or pushing equipment on repeatable routes. The CC1 Pro can be rented making it a highly accessible operating expense.

By automating up to 10,500 sq ft of floor scrubbing per hour for up to 5 hours per charge, the robot allows your facility to reallocate significant labor hours to higher-value tasks. Exact ROI depends on floor area, cleaning frequency, wage rates, current machine time, and how much work can be moved to autonomous routes.

With auto-docking and high-capacity batteries enabling 24/7 continuous operation, the robot acts as a reliable baseline cleaning workforce, allowing human staff to focus on detailed cleaning and facility management rather than pushing a machine.

Yes, its intelligent routing and precise fluid dispersal from its 3.96-gallon tanks ensure that water and detergent are used with maximum efficiency, eliminating human error and chemical waste. Actual savings depend on the selected cleaning settings, soil level, route design, and the facility's current process.

Over-the-Air (OTA) software updates keep the robot's navigation and capabilities current. Consult your FCE robotics specialist for any specific cloud-fleet management subscription terms for your facility's customized deployment.

During your initial deployment, an FCE robotic scrubber specialist maps your facility's workflow and cleaning zones. The mapping time required depends on the facility's size, number of zones, traffic patterns, floor transitions, and access requirements.

The system can be configured with cleaning routes and zones for different areas. The CC1 Pro stores and recalls specific maps and routes for different corridors, aisles, and open floors.

Shifts with approved routes can be scheduled effortlessly using the companion mobile app. During 24-hour operation, the machine cycles between cleaning and automatic charging at the workstation.

The CC1 Pro detects temporary obstacles such as people, carts, pallets, and moved furniture, then slows, stops, or adjusts its route as needed. Significant or permanent changes to the approved cleaning area may require the map or route to be updated.

Yes, the integrated mobile app can show cleaning progress and task results. The CC1 Pro also produces post-task heatmaps and can mark areas where it detected leftover stains and performed targeted re-cleaning.

An active connection is required for mobile app controls, OTA updates, and real-time monitoring. However, the machine can execute stored paths with its onboard intelligence.

Routine work includes a visual inspection, removing collected debris, checking brushes and squeegees, wiping sensors, and rinsing accessible components. With the optional workstation, charging, clean-water refill, detergent dispensing, and recovery-tank drainage are automated. Without it, staff manage the 3.96-gallon (15-liter) clean-water and recovery tanks manually.

Wearables replacement frequency depends on operating hours, floor texture, debris, cleaning settings, and inspection results.

FCE sells, deploys, and services the CC1 Pro autonomous scrubber nationwide. We offer a comprehensive maintenance add-on to keep your machine running at peak performance.

Software and navigation improvements are delivered through over-the-air updates. Internet access is required when updates are downloaded.

As your nationwide distributor and service provider, FCE supplies all authorized replacement wearables, parts, and appropriate floor detergents.

Absolutely. The CC1 Pro is designed to detect people, vehicles, and other obstacles, including sudden "pop-out" movements. It will slow, stop, or reroute as conditions require to keep staff and aisles safe.

The CC1 Pro has a built-in 3D LiDAR system that identifies people, vehicles, pallets, furniture and other obstacles. The highly sensitive ground-level detection sensors allow it to navigate safely and avoid drop-offs and low-profile hazards.

The robotic scrubber detects the person or vehicle, slows or stops, yields when necessary, and resumes the approved route when the path is clear.

The CC1 Pro is engineered to leave floors clean and dry in a single pass, ensuring high-traffic corridors remain safe for foot traffic.

Yes, in accordance with commercial robotics standards, the CC1 Pro is equipped with easily accessible physical emergency stop functionality and can be paused or overridden via the mobile app.

Yes, the machine meets all necessary commercial and industrial regulatory compliance requirements for safe indoor autonomous operation.

The CC1 Pro measures about 24.8 × 21.7 × 27.4 inches (62.9 × 55.2 × 69.5 cm). The optional WS3 docking station requires a minimal footprint that can easily fit into standard utility or janitorial closets.

The workstation requires a standard 110V plug-and-play outlet with no 220V wiring, electrician, or plumber necessary. Standard utility sink or drain access is required to utilize the automatic fluid management features, with no significant plumbing modifications needed.

Yes, with the optional Workstation WS3, the CC1 Pro can autonomously charge, refill water, drain dirty water, and fill detergent.

The CC1 Pro is designed to easily navigate tight corridors, standard commercial doorways, and aisles thanks to a narrow pass-through width of just 27.6 in (70 cm). Compatibility with the facility's access-control and elevator systems must be confirmed before the route is approved.

The CC1 Pro is engineered to navigate standard ADA-compliant inclines and thresholds typically found in commercial facilities. Floor transitions, ramps, thresholds, and gaps will be evaluated during initial setup.

The CC1 Pro is plug-and-play so deployment is typically quick. Once delivered, an FCE robotics specialist completes the initial mapping, setup, and training before the machine is released for autonomous operation. The exact timing depends on the facility's size, number of routes, traffic conditions, network readiness, dock location, and training needs.

Yes, FCE provides on-site setup, mapping and staff training during delivery. There is a one-time delivery and setup fee which can be discussed with your designated robotics specialist.

The CC1 Pro is designed for exceptional ease of use, with the intuitive mobile app controls to launch cleaning routes instantly. After initial setup and training, an employee can select an approved job and start it through the machine's available controls or app. The team does not need to program a new route each time it runs a scheduled task.

Your facility simply needs to ensure that the designated 110V power source is accessible for the docking station and that aisles are free of unusual blockages during the initial mapping.

Yes, FCE offers both purchase options and highly flexible rental terms.

The one-time $995 delivery and setup fee includes the docking station and initial setup. Optional maintenance coverage adds 15% to the rental rate and includes quarterly preventive maintenance and wear items.

Yes, FCE offers free on-site demos. A specialist will walk your floor, map the workflow, and show the CC1 Pro operating in a space like yours before you commit.

FCE leverages its nationwide distribution network to deliver, deploy, and set up your robot and docking station quickly once your lease or rental terms are finalized.

By choosing a 12-month or 24-month rental term, your facility retains the flexibility to easily transition to the newest autonomous cleaning technologies as your agreement concludes.